It is manufactured to place on your countertop, cooking appliances with a depth of 600/700 or 900 mm. Hence its height is 600 mm. This cold table is very practical, as it is placed under fry tops, barbecues, stoves, etc., the cook has the product at hand at all times, besides maximizing space in small kitchens. Exterior and interior in stainless steel AISI-304. 18/10. The back is made of galvanized steel. With adjustable stainless steel legs. Countertop with rounded front edge. Internal basin with rounded edges to facilitate cleaning and drainage at the base. Perforated drawers to facilitate ventilation. Equipped with telescopic stainless steel guides, allowing 100% opening. Insulation of eco-friendly injected polyurethane (CFC-free) with a density of 40 Kgs./m3, 60 mm thick. It is gastronorm, allowing GN 1/1 containers or combinations to be introduced into the drawers to separate different foods. There are two drawer sizes. The large one, with an internal height of 300 mm. and the small ones, which stack one on top of the other, capable of holding GN containers of 100 mm in height. Equipped with stainless steel telescopic guides, allowing 100% opening. With luminous on/off switch. Over-sized refrigeration unit, with automatic defrost. This unit allows its extraction to facilitate maintenance and cleaning of the condenser. Ventilated cold to achieve homogeneous temperature inside the chamber. Hydrocarbon refrigerant gas R290. Maximum performance to obtain the most ecological energy rating, and to reduce CO2 emissions. Operating temperature 0 +4°C, with an ambient temperature of +36°C. With digital thermometer-thermostat. This programmer allows adjusting temperatures, maximum and minimum, as well as defrosting automatically, in order to optimize the performance of the refrigerator to the maximum. Total interior volume of 105 liters.
