It is manufactured to place on its countertop, cooking appliances with a depth of 600/700 or 900 mm. Therefore, its height is 600 mm. This cold table is very practical, as when placed under frytops, barbecues, stoves, etc., the chef has the product at hand at all times, apart from maximizing space in small kitchens. Exterior and interior in stainless steel AISI-304. 18/10. The rear is made of galvanized steel. With adjustable stainless steel legs. Countertop with rounded front edge. Internal tank with rounded edges to facilitate cleaning and drainage at the base. Perforated drawers to facilitate ventilation. Equipped with stainless steel telescopic guides, which allows 100% opening. Eco-friendly injected polyurethane insulation (CFC-free) with a density of 40 Kgs./m3, 60 mm thick. It is gastronorm, being able to insert GN 1/1 containers in the drawers, or combinations, to separate the different foods. There are two drawer sizes. The large one, with an internal height of 300 mm. and the small ones, which go one on top of the other, being able to accommodate GN containers of 100 mm in height. It has stainless steel telescopic guides, which allows 100% opening. With illuminated start-stop switch. Over-sized refrigeration unit, with automatic defrost. This unit allows its extraction to facilitate maintenance and cleaning of the condenser. Ventilated cold to achieve homogeneous temperature inside the chamber. Hydrocarbon refrigerant gas R290. Maximum performance to obtain the most ecological energy rating, and to reduce CO2 emissions. Operating temperature 0 +4°C, with an ambient temperature of +36°C. With digital thermometer-thermostat. This programmer allows adjusting temperatures, maximum and minimum, as well as automatic defrosts, in order to optimize the performance of the refrigerator. Total interior volume of 170 liters.
