All in stainless steel 18/10 AISI 304. The washing tunnels are composed of different modules, which allows disassembly to facilitate entry and then proceed with easy assembly once in the workplace. The entire tunnel is manufactured with double walls, including guillotine doors, which reduces noise and heat loss. The tubs are stamped, with rounded edges for easy cleaning. Additional modules include modules for angled pre-washing, modules for angled drying, intermediate neutral modules, or neutral entry zone modules, detergent and rinse aid dispensers, etc. The filter consists of a flat and inclined surface for the drainage of solid waste and a basket that collects it. Easily removable for emptying and cleaning. They allow an entry height of 450 mm, for baskets of 500x500, being able to wash trays, GN containers, and other utensils. The basket is dragged with side guides, facilitating cleaning. The teeth that move the baskets are made of thick stainless steel. They are reversible, which allows changing the direction of entry or exit by performing simple operations. However, we recommend indicating the direction of travel when placing the order, and it will come prepared from the factory. The speed of the basket's advancement is electronically regulated by a frequency converter and is controlled from the control panel. Each of the pre-washing/washing/rinsing and drying modules starts and stops independently, only if there is really a basket inside. This system improves energy consumption. Control is carried out by means of an electronic control panel, with a multifunction screen, a 4-digit LED. It has 4 touch buttons to program all functions, provide information, select programs, etc. With USB connection. The recommended water temperature for feeding is from a heater, from 40 to 60 °C, as indicative production data are based on this. If the water enters from 15 to 40 °C, production will be lower, and energy consumption higher. It also depends on whether the heat recovery module is available. It comes with 2 baskets (multipurpose and for plates) and 1 cutlery cup. With adjustable stainless steel legs, 200 mm. Washing/rinsing module with a length of 1150 mm, equipped with a 70-liter tank and a washing system with 5 arms and 60 nozzles, with a double-flow pump of 2.7 kW. The temperature management system, with heating or cooling of the water, is electronically controlled. A constant feed pressure of 2 to 4 bars is necessary.
