Interior and exterior in stainless steel 18/10 AISI-304. Insulated tank with fiberglass. With ventilated heating for better heat distribution. With circular, stainless steel, shielded resistors. With digital electronic thermometer-thermostat and luminous on-off switch. With 44 pairs of guides for GN containers. Separation between guides of 55 mm. Total air circulation as the containers do not touch the walls of the tank. With 2 pivot doors. With 4 reinforced wheels of 150 mm Ø, 2 of them with brake. With bumpers on the 4 corners. With handles for driving, located on the narrow side of the trolley. Extensible connection cable, spiral, single-phase, with hook on the side when in motion. Capacity for one GN 2/1 container or two GN 1/1 containers per guide, as the entrance is on the side of 530 mm. Containers not included. Moisture is generated by filling the GN 2/3 containers that come as standard in the base of the tank, above the heating group, and thus, the food does not dry out. Hinges designed so that the doors open up to 270°, so that when they are open, they are attached to the side of the trolley and do not cause inconvenience. Doors with silicone gasket to maintain internal temperature. Pressure closure, with key.
